The Dynaco Tube Audio Forum

Dedicated to the preservation, restoration and rebuilding of all Dynaco tube audio equipment

Logged as Anonymous. Your last visit was on

You are not connected. Please login or register

The Dynaco Tube Audio Forum » Basket » Need Help with a preamp for dynaco st 70

Post new topic  Reply to topic

View previous topic View next topic Go down  Message [Page 1 of 1]

1 Need Help with a preamp for dynaco st 70 on Wed Mar 25, 2009 7:41 pm

merickrc


I just bought a dynaco st 70 kit this is my first tube amp i need a good preamp with volume control to run my new dynaco amp right now i have a turntable hooked up to hagerman bugal preamp then to a chip amp out to my half chang fostex207e speakers here is alink to pics of my current setup

http://www.flickr.com/photos/35669902@N06/3300455569/

View user profile

2 Re: Need Help with a preamp for dynaco st 70 on Wed Mar 25, 2009 8:14 pm

Bob Latino


Admin
One of the best values around in a tube preamp is the SP-6 preamp kit from Roy Mottram on the tubes4hifi web site. It works really well with a Dynaco ST-70 tube amp and is one of the very few tube preamp kits that has a phono stage if you still spin vinyl. Check it out at the link below.

http://www.tubes4hifi.com/pre8.htm

A nice build link for this preamp kit is found below.

http://forums.klipsch.com/forums/t/114302.aspx?PageIndex=1

Bob

View user profile http://www.tubes4hifi.com/bob.htm

View previous topic View next topic Back to top  Message [Page 1 of 1]

Post new topic  Reply to topic

The Dynaco Tube Audio Forum » Basket » Need Help with a preamp for dynaco st 70

Permissions of this forum:
You can reply to topics in this forum