The Dynaco Tube Audio Forum

Dedicated to the restoration and preservation of all original Dynaco tube audio equipment - Customer support for Tubes4hifi VTA tube amp and preamp kits and all Dynakitparts.com products


    ST-70 driver board cap question

    avatar
    Elrick

    Posts : 71
    Join date : 2012-09-02
    Location : Bellingham WA

    ST-70 driver board cap question Empty ST-70 driver board cap question

    Post by Elrick on Sat Oct 12, 2013 8:32 pm

    I just finished re-capping my ST-70's driver board.  I used 0.22 mF for the 4 coupling caps and I also used the same 0.22mF for the other two that were originally 0.05 mF. First impression is the bass seems to be more pronounced. After a bit of reading, I see that I probably should have used 0.1 mF for the two that were 0.05 mF.  I'll go back in and change those out to 0.1 mF if that's the smart thing to do.

    By the way, I just used the white tubular Cornell Dubliners from Mouser rated at 600V, wondering if anybody else has used these in audio circuits.   Sounds good on first impression.


    ST-70 driver board cap question DSC_2373_zps5d018d92

      Current date/time is Tue Sep 17, 2019 3:25 am