The Dynaco Tube Audio Forum

Would you like to react to this message? Create an account in a few clicks or log in to continue.
The Dynaco Tube Audio Forum

Dedicated to the restoration and preservation of all original Dynaco tube audio equipment - Customer support for Tubes4hifi VTA tube amp and preamp kits and all Dynakitparts.com products


3 posters

    Dynakit PAS 2 Phono Stage?

    avatar
    tkemmett


    Posts : 14
    Join date : 2013-10-24

    Dynakit PAS 2 Phono Stage? Empty Dynakit PAS 2 Phono Stage?

    Post by tkemmett Fri Nov 08, 2013 12:37 am

    Howdy All,
    Does a PAS2 tube preamp require/benefit from a separate phono preamp?
    TIA,
    TK
    peterh
    peterh


    Posts : 1823
    Join date : 2012-12-25
    Location : gothenburg, sweden

    Dynakit PAS 2 Phono Stage? Empty Re: Dynakit PAS 2 Phono Stage?

    Post by peterh Fri Nov 08, 2013 3:31 am

    tkemmett wrote:Howdy All,
    Does a PAS2 tube preamp require/benefit from a separate phono preamp?
    TIA,
    TK
    In general no. It's better then most ( depends on the PSU and rectifiers condition)
    avatar
    tkemmett


    Posts : 14
    Join date : 2013-10-24

    Dynakit PAS 2 Phono Stage? Empty Re: Dynakit PAS 2 Phono Stage?

    Post by tkemmett Fri Nov 08, 2013 5:07 am

    I appreciate the reply...I figured it might be ok without a separate stage but being new to the Dyna family, I'm unsure of the details.
    Thanks again,
    TK
    avatar
    GP49


    Posts : 792
    Join date : 2009-04-30
    Location : East of the sun and west of the moon

    Dynakit PAS 2 Phono Stage? Empty Re: Dynakit PAS 2 Phono Stage?

    Post by GP49 Fri Nov 08, 2013 12:47 pm

    The PAS phono stage is also easily modified for closer compliance to RIAA (you lose the capability for NAB Tape Head and flat microphone usage, but that doesn't matter to most people) and to upgrade parts.

    Sponsored content


    Dynakit PAS 2 Phono Stage? Empty Re: Dynakit PAS 2 Phono Stage?

    Post by Sponsored content


      Current date/time is Thu Mar 28, 2024 11:05 am