The Dynaco Tube Audio Forum

Would you like to react to this message? Create an account in a few clicks or log in to continue.
The Dynaco Tube Audio Forum

Dedicated to the restoration and preservation of all original Dynaco tube audio equipment - Customer support for Tubes4hifi VTA tube amp and preamp kits and all Dynakitparts.com products


3 posters

    32 FREE Dynaco tube and solid state assembly manuals available for download - links inside

    Bob Latino
    Bob Latino
    Admin


    Posts : 3260
    Join date : 2008-11-26
    Location : Massachusetts

    32 FREE Dynaco tube and solid state assembly manuals available for download - links inside Empty 32 FREE Dynaco tube and solid state assembly manuals available for download - links inside

    Post by Bob Latino Wed Nov 26, 2008 5:42 pm

    Do you have older Dynaco tube or solid state audio equipment and need assembly manuals for rebuilding or repairing ? If so, the following 32 Dynaco assembly manuals are available FREE OF CHARGE for download or sent by Email (solid state manuals) at the links below. All manuals are in pdf format.

    We believe this to be the largest collection of FREE original Dynaco tube manuals available anywhere on the internet  ... (solid state manuals sent by Email)

    NOTE - You have to be a member of the forum for the links to show up.

    1. Dynaco FM-1 mono tuner manual
    2. Dynaco FM-3 stereo tuner manual
    3. Dynaco FMX-3 multiplex manual for the FM-3
    4. Dynaco Mark 2 power amplifier manual
    5. Dynaco Mark 3 power amplifier manual
    6. Dynaco Mark 4 power amplifier manual
    7. Dynaco Mark 6 power amplifier manual
    8. Dynaco PAM-1 mono preamp manual
    9. Dynaco PAS-2 stereo preamp manual
    10. Dynaco PAS-3X stereo preamp manual
    11. Dynaco PAS-4 preamp owners manual
    12. Dynaco SCA-35 integrated amplifier manual
    13. Dynaco ST-35 power amplifier manual
    14. Dynaco ST-70 power amplifier manual
    15. Dynaco ST-70 Series II power amplifier manual
    16. Dynaco FMA-2 insert amplifier manual

    Link > Dynaco tube assembly manuals

    We have also have the following Dynaco solid state assembly manuals listed below ...

    1. Dynaco AF-6 stereo tuner manual > AF-6 manual
    2. Dynaco FM-5 stereo tuner manual > FM-5 manual
    3. Dynaco PAT-4 preamp manual > PAT- 4 manual
    4. Dynaco PAT-5 preamp manual > PAT-5 manual
    5. Dynaco SCA-50 integrated amplifier manual > SCA-50 manual
    6. Dynaco SCA-80Q integrated amp manual > SCA-80Q manual
    7. Dynaco SE-10 equalizer manual > SE-10 manual
    8. Dynaco ST-80 power amplifier manual > ST-80 manual
    9. Dynaco ST-120 power amplifier manual > ST-120 manual
    10. Dynaco ST-150 power amplifier manual > ST-150 manual
    11. Dynaco ST-400 power amplifier manual > ST-400 manual
    12. Dynaco ST-410 power amplifier manual > ST-410 manual
    13. Dynaco ST-416 power amplifier manual > ST-416 manual
    14. Dynaco DSC-1 stereo control unit > DSC-1 manual
    15. Dynaco QD-1 Quadaptor manual > QD-1 manual
    16. Dynaco QSA-300 2/4 channel amplifier manual > QSA-300 manual

    Click on the link to see the manual. It may take up to 15 seconds for the manual to fully load. Again > You must be a member of this forum for the links to show up. You will then see a DOWNLOAD link on the left top of the screen to download the manual. If you hover over the manual with your mouse pointer you will see a "+" icon to make the manual larger on your screen.

    Bob


    Last edited by Bob Latino on Mon Dec 18, 2023 12:56 pm; edited 9 times in total

    garagepunk66 and LGilbert like this post

    avatar
    oldschool


    Posts : 1
    Join date : 2012-08-19

    32 FREE Dynaco tube and solid state assembly manuals available for download - links inside Empty Re: 32 FREE Dynaco tube and solid state assembly manuals available for download - links inside

    Post by oldschool Sun Nov 17, 2013 11:11 am

    Thanks Bob, I am retired for medical issues and have some Dyna gear I have been putting off for a long time.Still use Pas 3 build it back in the 60's. should have logged on the forum a long long time ago.
    James
    peterh
    peterh


    Posts : 1823
    Join date : 2012-12-25
    Location : gothenburg, sweden

    32 FREE Dynaco tube and solid state assembly manuals available for download - links inside Empty Re: 32 FREE Dynaco tube and solid state assembly manuals available for download - links inside

    Post by peterh Wed Dec 11, 2013 1:50 pm

    Bob,
    i just downloaded the PAS-1 manual , but it is password protected so i cannot (easily) save it.

    Is the password a guarded secret or can you share it with me ?

    Peter h
    Bob Latino
    Bob Latino
    Admin


    Posts : 3260
    Join date : 2008-11-26
    Location : Massachusetts

    32 FREE Dynaco tube and solid state assembly manuals available for download - links inside Empty Re: 32 FREE Dynaco tube and solid state assembly manuals available for download - links inside

    Post by Bob Latino Wed Dec 11, 2013 2:32 pm

    Hi Peter,

    The document is password protected only so much that you can't take it apart and change the document. I just downloaded two of the manuals and just saved them on my own computer. After the manual is on the screen (at least on my computer) if I move the cursor to the bottom middle of the document page > a little box comes up with SAVE TO DISK symbol on the left of the box and a PRINT symbol right next to it. Just hit the SAVE TO DISK symbol and give a location on your computer when the dialog box comes up and it should save in pdf format on your computer.

    Do you mean the PAS-2 ? or PAM-1 manuals ? There is no PAS-1 manual up there ..

    Bob


    Last edited by Bob Latino on Sat Nov 02, 2019 8:55 am; edited 1 time in total
    peterh
    peterh


    Posts : 1823
    Join date : 2012-12-25
    Location : gothenburg, sweden

    32 FREE Dynaco tube and solid state assembly manuals available for download - links inside Empty Re: 32 FREE Dynaco tube and solid state assembly manuals available for download - links inside

    Post by peterh Wed Dec 11, 2013 2:44 pm

    i mean pam-1. Sorry.
    Ok i'll manage with the manual.
    What do i want i pam-1 to you might ask?
    Well the answer is that i would like to complete my uTracer with means to actually run tubes in proper working point and listen for noice and microfonics. A pam-1 is 80% done.

      Current date/time is Thu Mar 28, 2024 7:00 am