The Dynaco Tube Audio Forum

Would you like to react to this message? Create an account in a few clicks or log in to continue.
The Dynaco Tube Audio Forum

Dedicated to the restoration and preservation of all original Dynaco tube audio equipment - Customer support for Tubes4hifi VTA tube amp and preamp kits and all Dynakitparts.com products


4 posters

    Looking for mk iii information

    notboating
    notboating


    Posts : 11
    Join date : 2013-12-17
    Location : Western PA

    Looking for mk iii information Empty Looking for mk iii information

    Post by notboating Tue Dec 17, 2013 8:18 am

    My first venture into tube gear was a pair of refurbed Mk iii's and I absolutely love them. I have finally achieved that sound i remeber from my youth... In any case, I'm interested in what tubes other Mk iii owners are using in their amps and what the  percieved changes were as a result.  

    I am also looking for a good resource on adjusting the bias. How to know when to do it as well as how to do it.

    Thanks in advance for sharing!


    Pre: McIntosh C-28
    Amp: Dynaco Mk iii's
    Speakers: Tyler Acoustic Linbrook Signature
    DAC: Grant Fidelity Tube Dac 11
    CD: Onkyo 525
    Analog: Systemdek IIX
    peterh
    peterh


    Posts : 1832
    Join date : 2012-12-25
    Location : gothenburg, sweden

    Looking for mk iii information Empty Re: Looking for mk iii information

    Post by peterh Tue Dec 17, 2013 11:34 am

    As regards to bias adjustment, pick up the mkIII manual, om page 11 the procedure is described.
    ( how often ? Well whenever tubes are replaced or 4 times a year  whichever comes first)


    Last edited by peterh on Tue Dec 17, 2013 5:22 pm; edited 1 time in total (Reason for editing : spelling error ( pink => pick , fun in itself :-))
    notboating
    notboating


    Posts : 11
    Join date : 2013-12-17
    Location : Western PA

    Looking for mk iii information Empty Re: Looking for mk iii information

    Post by notboating Tue Dec 17, 2013 12:28 pm

    lets hope i dont have to replace tubes 4x/year...
    peterh
    peterh


    Posts : 1832
    Join date : 2012-12-25
    Location : gothenburg, sweden

    Looking for mk iii information Empty Re: Looking for mk iii information

    Post by peterh Tue Dec 17, 2013 12:46 pm

    notboating wrote:lets hope i dont have to replace tubes 4x/year...
    I don't think so :-)
    But better check them one time extra then one to late.

    corndog71
    corndog71


    Posts : 840
    Join date : 2013-03-19
    Location : It can get windy here

    Looking for mk iii information Empty Re: Looking for mk iii information

    Post by corndog71 Tue Dec 17, 2013 4:17 pm

    Show us some pics of your Mk3s!
    mark four
    mark four


    Posts : 51
    Join date : 2011-08-12
    Age : 69
    Location : philadelphia , home of dynaco

    Looking for mk iii information Empty refurbished mark III 's

    Post by mark four Tue Dec 17, 2013 8:59 pm

     Cool i have a nice pair that i purchased on ebay . they had weak guitar tubes in them which i  replaced with sovtek 6550's i briefly tried groove tube 6550 's but i prefer the sovteks . i have some spares that are ge branded . when the sovteks go i will probably go with the general electrics . they are nice amps  . i hope you enjoy them as much as i do . i have to put photos of them up .
    notboating
    notboating


    Posts : 11
    Join date : 2013-12-17
    Location : Western PA

    Looking for mk iii information Empty Re: Looking for mk iii information

    Post by notboating Wed Dec 18, 2013 8:21 am

    Trying to post pics here is... well just not that easy... will post link to picasa album after my 7 day penance...

    Sponsored content


    Looking for mk iii information Empty Re: Looking for mk iii information

    Post by Sponsored content


      Current date/time is Fri Apr 19, 2024 10:40 am