Very strange, indeed. I measured the PAT-4 and PAS-3 and they both measure about 13" x 8". I use Roy's small toroids on the PAS-3, which results in a tight fit. I guess that your toroid is too big. Roy's current PS offerings should work. Or am I just confused?
Montana's Dilemma
Guest- Guest
- Post n°2
Re: Montana's Dilemma
well here are some simple facts.
The chassis I measure at 7.5" x 13". The SP9 pcb is 7.5" x 5.5", the PH10 pcb is 5.5" x 3.5" and the toroid diameter is approx. 4.5", it very quickly becomes apparent that the PAT4 chassis, with my setup, will not do.
Anyway, I have ordered my custom SP9 chassis, I should have it end of next week.
The chassis I measure at 7.5" x 13". The SP9 pcb is 7.5" x 5.5", the PH10 pcb is 5.5" x 3.5" and the toroid diameter is approx. 4.5", it very quickly becomes apparent that the PAT4 chassis, with my setup, will not do.
Anyway, I have ordered my custom SP9 chassis, I should have it end of next week.
|
|