The Dynaco Tube Audio Forum

Would you like to react to this message? Create an account in a few clicks or log in to continue.
The Dynaco Tube Audio Forum

Dedicated to the restoration and preservation of all original Dynaco tube audio equipment - Customer support for Tubes4hifi VTA tube amp and preamp kits and all Dynakitparts.com products


    VTA ST-70 turn on noise

    polarflux
    polarflux


    Posts : 49
    Join date : 2010-02-12
    Location : Alaska

    VTA ST-70 turn on noise Empty VTA ST-70 turn on noise

    Post by polarflux Mon Apr 05, 2010 3:10 pm

    I don't know if this is normal, when I turn on my ST-70 and as the tubes warm up (approximately the first 3-45 seconds) there is an audible buzz coming out of the speakers. It does not concern me much, but I am interested why this might be happening. Is the noise perhaps due to the bias currents in the power tubes being out of balance as the tubes warm? I notice the same sort of noise (but not as loud) when the biases are intentionally set out whack.

    Thanks

      Current date/time is Thu Mar 28, 2024 6:32 pm