The Dynaco Tube Audio Forum

Dedicated to the restoration and preservation of all original Dynaco tube audio equipment - Customer support for Dynaco VTA tube amp kits, all Tubes4hifi.com products and all Dynakitparts.com products


    Pas 3 Bass

    Share

    JNTIT

    Posts : 4
    Join date : 2010-04-11

    Pas 3 Bass

    Post by JNTIT on Sun Apr 11, 2010 3:19 pm

    Afternoon! I picked up a pas3, However the bass pot is broken. I seem to be able to find everything but the bass pot. Does anyone know where I might get one, or a suitable replacement? Thanks John

    Bob Latino
    Admin

    Posts : 2378
    Join date : 2008-11-26
    Location : Massachusetts

    Re: Pas 3 Bass

    Post by Bob Latino on Sun Apr 11, 2010 6:00 pm

    JNTIT wrote:Afternoon! I picked up a pas3, However the bass pot is broken. I seem to be able to find everything but the bass pot. Does anyone know where I might get one, or a suitable replacement? Thanks John

    Hi John,

    The bass pot on the PAS-3 is a 750K pot which is Dynaco part # 147754. You should be able to use any 750K pot with a linear taper to replace it. I looked online and Surplus Sales has a 750K pot that I am pretty sure you could use. There may be other places online that also sell a pot that could be used. Check the link below for Surplus Sales part number > (RCV) 137-6414.

    Surplus Sales potentiometers

    Bob

    JNTIT

    Posts : 4
    Join date : 2010-04-11

    PAS 3 bass pot

    Post by JNTIT on Sun Apr 11, 2010 6:45 pm

    Thanks for the info will check it out. Thanks again! John

    Sponsored content

    Re: Pas 3 Bass

    Post by Sponsored content Today at 2:41 pm


      Current date/time is Thu Sep 29, 2016 2:41 pm