The Dynaco Tube Audio Forum

Dedicated to the restoration and preservation of all original Dynaco tube audio equipment - Customer support for Dynaco VTA tube amp kits, all Tubes4hifi.com products and all Dynakitparts.com products


    ST-120 Build In progress

    Share

    dman2112

    Posts : 1
    Join date : 2018-03-22

    ST-120 Build In progress

    Post by dman2112 on Sat Apr 07, 2018 8:41 am

    Hello all,

    I am new to the forum but have built several amps / projects over the years.  I am currently in progress with my ST-120 build.  Only changes I made were painting the transformers and adding an IEC "dongle" for the power cord.

    The kit is packaged very well and the instructions are excellent.  Only issues I had is the chassid was scratched up because it really isn't packaged properly and I didn't dig the power "lamp cord" even though I understand that was how it was originally done.

    Hopefully I will have time to finish it in the next few days.

    dman2112

    https://photos.google.com/photo/AF1QipP6MCxCRbP1RSTywl7c59K_NVtyRrfwNck_WAbu

    https://photos.google.com/photo/AF1QipOaXLdsBZDe8EDPlrm39SPfx94MmQdvrlX6yUTn

    https://photos.google.com/photo/AF1QipMO7qhDtAfZvrg3bDEJuYysQ7ifBkh4yYqbf1--

    MV213

    Posts : 12
    Join date : 2017-11-04

    Re: ST-120 Build In progress

    Post by MV213 on Sat May 05, 2018 11:29 am

    Hi Dman2112! First, I can’t see your pictures. Can you double-check your shareing settings? I had to post a link to just the shared folder for mine to work—Google Photos is a little funky for sharing on forums.

    Second, I had the same issue with my chassis. Not too pleased with that although the rest of the kit was awesome. I’ll probably end up doing something custom this winter during the rainy season.

    Third, my finished amp is posted here in the “My dynaco system” section as well. I did a couple of mods and you can see how I had to share my photos folder.

    MV213
    Dallas, OR (the OTHER Big D)

      Current date/time is Thu Oct 18, 2018 2:20 am