The Dynaco Tube Audio Forum

Dedicated to the restoration and preservation of all original Dynaco tube audio equipment - Customer support for Dynaco VTA tube amp kits, all products and all products

    6GH8/6U8 driver for the Mark III


    Posts : 86
    Join date : 2013-07-13
    Location : Rochester NY

    6GH8/6U8 driver for the Mark III

    Post by WLT on Sat Nov 24, 2018 10:06 pm

    I purchased two of the adapters to use the 6GH8 or 6U8 tubes in my Mark IIIs or Mark IIs. Attached is a photo of one of the adapters in my spare Mark III. I have an appropriate set I use on the 7199 amps but this is the first adapters I have tried on the 6AN8 amps. Nothing wrong with my 6AN8s but wanted to try these.

    All the voltages on the circuit board are similar to those from the 6AN8. They sound great. I put them in my regular Mark III and they are playing in the main system now. It will be interesting to compare with the Mark IV, ST 70 and SCA 35 amps now that they all can use the same driver tube.


    Posts : 651
    Join date : 2008-12-05

    Re: 6GH8/6U8 driver for the Mark III

    Post by PeterCapo on Sun Nov 25, 2018 1:58 am

    One of these days I hope to find the time to build a pair of Mark IIIs. Had a pair a long time ago, but they are long gone.

      Current date/time is Thu Feb 21, 2019 1:02 pm