The Dynaco Tube Audio Forum

Dedicated to the restoration and preservation of all original Dynaco tube audio equipment - Customer support for Dynaco VTA tube amp kits, all Tubes4hifi.com products and all Dynakitparts.com products

    My Pair of MK111 - in for gutting

    Share

    Clik2media

    Posts: 40
    Join date: 2009-01-18

    My Pair of MK111 - in for gutting

    Post by Clik2media on Sun Jan 25, 2009 7:23 pm

    The previous owner was all over the place with "upgrade" parts. Probably butchering from other pieces. I am going to take this back to the begining. Original board layout, with upgraded components.

    DaLarry

    Posts: 8
    Join date: 2009-02-15
    Age: 71
    Location: Denver, Colorado

    Re: My Pair of MK111 - in for gutting

    Post by DaLarry on Mon Feb 16, 2009 9:33 am

    I don't see anything?

    Clik2media

    Posts: 40
    Join date: 2009-01-18

    Re: My Pair of MK111 - in for gutting

    Post by Clik2media on Mon Mar 02, 2009 10:45 pm

    Sorry about that, I am going to be hosting my Dynaco images here on my site www.vintage-tube.com
    I have about half dozen ST-70's a pair of MK3's a bunch of FM3's and Pats as well as some solid state 120's
    too many images for here...

    vargasmongo3435

    Posts: 4
    Join date: 2013-02-17
    Age: 43
    Location: Puerto Rico

    Re: My Pair of MK111 - in for gutting

    Post by vargasmongo3435 on Thu Feb 21, 2013 9:23 pm

    Hello guys I'm new to this forum and I want it to build a Mark MKIII, this might take some time but I'm working with the PCB layout is about the same I just a made the tracks a little wider, does some one know the exact measurements of the board in millimeters? and the hole distance too.







    Regards
    Juan

    vargasmongo3435

    Posts: 4
    Join date: 2013-02-17
    Age: 43
    Location: Puerto Rico

    Re: My Pair of MK111 - in for gutting

    Post by vargasmongo3435 on Thu Feb 21, 2013 9:35 pm

    this is the bottom.

      Current date/time is Mon Sep 01, 2014 1:31 pm