The Dynaco Tube Audio Forum

Dedicated to the restoration and preservation of all original Dynaco tube audio equipment - Customer support for Dynaco VTA tube amp kits, all Tubes4hifi.com products and all Dynakitparts.com products


    ST35 Cap board

    Share

    scott6058

    Posts : 37
    Join date : 2009-01-21

    ST35 Cap board

    Post by scott6058 on Sun Mar 06, 2011 9:31 pm

    Anyone know anything about this cap board from Audio Sound Lab?
    I can't find anything about it.
    Bought in a pile of other gear.
    Appreciate any help.
    Thanks Scott[url][/url]

    Bob Latino
    Admin

    Posts : 2375
    Join date : 2008-11-26
    Location : Massachusetts

    Re: ST35 Cap board

    Post by Bob Latino on Mon Mar 07, 2011 7:46 am

    That board replaces the quad cap in an ST-35. The A, B, C and D eyelets are where the connections are made. Not sure exactly where it mounts - probably on the top of the amp in front of the left output transformer and the power transformer.

    Bob

    scott6058

    Posts : 37
    Join date : 2009-01-21

    Re: ST35 Cap board

    Post by scott6058 on Mon Mar 07, 2011 9:45 am

    Is Audio Sound Lab still business?
    Googled them to no avail.
    Thanks again Bob.
    Regards Scott

    stewdan

    Posts : 160
    Join date : 2010-03-07
    Age : 78
    Location : Houston Texas

    Re: ST35 Cap board

    Post by stewdan on Mon Mar 07, 2011 5:23 pm

    Hi Scott --

    (1) The Audio Sound Lab items are sold on the E____ Site by seller "tubes4pro".

    Do a advanced search for his "Completed Auctions", and you will see a ST35 Cap Board with a Time Delay feature built-in. It looks like you have the earlier version of the ST35 Cap Board. I have bought 4 or 5 items from him over the last 5-6 years and they are very nice quality with easy to follow instructions, with pictures.

    (2) If you send him a message via the E____ Site, I suggest that you say that you bought an ST-35 from someone and the un-installed Version 1.0 Rev C Cap Board was included, but you don't have hookup instructions. Maybe he will send you the hookup instructions. In the past, he has been good about replacing lost documentation.

    Stew


    Sponsored content

    Re: ST35 Cap board

    Post by Sponsored content Today at 9:47 am


      Current date/time is Tue Sep 27, 2016 9:47 am