The Dynaco Tube Audio Forum

Would you like to react to this message? Create an account in a few clicks or log in to continue.
The Dynaco Tube Audio Forum

Dedicated to the restoration and preservation of all original Dynaco tube audio equipment - Customer support for Tubes4hifi VTA tube amp and preamp kits and all Dynakitparts.com products


3 posters

    WANTED: PAS-2 Or PAS-3 Just The Chassis Or Complete Pre-Amp

    avatar
    JimOfOakCreek


    Posts : 13
    Join date : 2011-06-25
    Location : Oak Creek, WI

    WANTED: PAS-2 Or PAS-3 Just The Chassis Or Complete Pre-Amp Empty WANTED: PAS-2 Or PAS-3 Just The Chassis Or Complete Pre-Amp

    Post by JimOfOakCreek Sun Jun 26, 2011 12:10 pm

    I'm looking to put together a PAS-2 or PAS-3. I need something to work with, a shell, a chassis, a face plate or a complete pre-amp.
    Luddite
    Luddite


    Posts : 233
    Join date : 2009-02-04
    Age : 73
    Location : Texas

    WANTED: PAS-2 Or PAS-3 Just The Chassis Or Complete Pre-Amp Empty Re: WANTED: PAS-2 Or PAS-3 Just The Chassis Or Complete Pre-Amp

    Post by Luddite Mon Jun 27, 2011 1:14 pm

    JimOfOakCreek wrote:I'm looking to put together a PAS-2 or PAS-3. I need something to work with, a shell, a chassis, a face plate or a complete pre-amp.

    Jim,

    If you would like to build an all new unit, Kevin at Dynakit Parts www.dynakitparts.com has advised that his new PAS chassis' should be available within the next 60 days. There are also several suppliers for the circuit boards and other necessary parts. If you have any questions, feel free to send me a PM and I will be happy to reply.

    Best Regards,
    Charlie

    P.S. I am currently in the process building an "all new" PAS preamplifier!
    avatar
    JimOfOakCreek


    Posts : 13
    Join date : 2011-06-25
    Location : Oak Creek, WI

    WANTED: PAS-2 Or PAS-3 Just The Chassis Or Complete Pre-Amp Empty Re: WANTED: PAS-2 Or PAS-3 Just The Chassis Or Complete Pre-Amp

    Post by JimOfOakCreek Mon Jun 27, 2011 1:42 pm

    Luddite wrote:
    JimOfOakCreek wrote:I'm looking to put together a PAS-2 or PAS-3. I need something to work with, a shell, a chassis, a face plate or a complete pre-amp.

    Jim,

    If you would like to build an all new unit, Kevin at Dynakit Parts www.dynakitparts.com has advised that his new PAS chassis' should be available within the next 60 days. There are also several suppliers for the circuit boards and other necessary parts. If you have any questions, feel free to send me a PM and I will be happy to reply.

    Best Regards,
    Charlie

    P.S. I am currently in the process building an "all new" PAS preamplifier!

    Thanks for the info. Based on that information I think I will wait until Dynakit releases that PAS kit. Do you know if there will be reproduction knobs, decals etc. ?

    BTW: I ordered a ST-35 kit from Dynakit Parts last week. It's supposed to ship today.
    Luddite
    Luddite


    Posts : 233
    Join date : 2009-02-04
    Age : 73
    Location : Texas

    WANTED: PAS-2 Or PAS-3 Just The Chassis Or Complete Pre-Amp Empty Re: WANTED: PAS-2 Or PAS-3 Just The Chassis Or Complete Pre-Amp

    Post by Luddite Mon Jun 27, 2011 2:19 pm

    I understand that Kevin plans to offer a couple of faceplate options (with or without tone controls) and also the knobs. In addition, he plans to offer many of the other parts, including the switches. I'm not sure about the rear labels, but at least one of the board suppliers offers a replacement label as an accessory. However, if you would be interested, I have an Excel file of a PAS label which I made up for my preamp. I believe that I was able to match the original fonts (especially the "script") very closely, if not exactly. You could easily modify this to suit your own usage. Send me a PM with an email address and I will gladly share the file. BTW, I also built, and currently use, a Dynakit Parts ST-35, a couple of years ago. Good luck anmd enjoy your projects!

    Best Regards,
    Charlie
    DynakitParts
    DynakitParts


    Posts : 215
    Join date : 2008-11-30

    WANTED: PAS-2 Or PAS-3 Just The Chassis Or Complete Pre-Amp Empty Dynakit PAS Chassis

    Post by DynakitParts Mon Jun 27, 2011 10:16 pm


    Hi Guys,
    The PAS chassis is in the works and as Charlie said it will about (60) days
    before this is available. This will be a chassis kit with (2) choices of faceplates in
    addition to an array of parts such as the knobs, switches, AC outlets, can capacitors
    and related hardware. We also just introduced our PA-211 (120) vac power transformer
    which you can find on our website: www.dynakitparts.com

    We plan to provide links to a number of suppliers of PAS standard and upgraded boards.
    Roy Mottram of course will be on our recommended list of suppliers for both his PAS
    upgraded boards and related components.

    We do plan to offer labels for the PAS...Both original format and a modern version.
    These will be nice quality vinyl coated peel & stick label unlike the ones found on
    Ebay.

    The first production PAS chassis is promised to Charlie.

    Regards,

    Kevin @ Dynakit



    Sponsored content


    WANTED: PAS-2 Or PAS-3 Just The Chassis Or Complete Pre-Amp Empty Re: WANTED: PAS-2 Or PAS-3 Just The Chassis Or Complete Pre-Amp

    Post by Sponsored content


      Current date/time is Thu Mar 28, 2024 7:43 am