The Dynaco Tube Audio Forum

Would you like to react to this message? Create an account in a few clicks or log in to continue.
The Dynaco Tube Audio Forum

Dedicated to the restoration and preservation of all original Dynaco tube audio equipment - Customer support for Tubes4hifi VTA tube amp and preamp kits and all Dynakitparts.com products


    Triode kit for Mk III

    avatar
    Dingojazz


    Posts : 73
    Join date : 2010-09-03

    Triode kit for Mk III  Empty Triode kit for Mk III

    Post by Dingojazz Sat Nov 03, 2018 8:15 pm

    Hello Bob et. al.,

    Just got the triode switching kit from VTA for Mk III. Of course, the instructions are for ST70, so a simple (probably obvious) question. I'll ask to be on the safe side.

    I'm assuming the 'rear' (pentode) side of the Mk III is where the power cord is ?(since, unlike the '70 the transformers are lateral...)

    Let me know if I'm in the ballpark.

    Thanks,

    Kevin
    avatar
    Dingojazz


    Posts : 73
    Join date : 2010-09-03

    Triode kit for Mk III  Empty Ok, I guess

    Post by Dingojazz Mon Nov 05, 2018 2:00 pm

    I guessed right.
    Fired up, -no smoke.

    K

      Current date/time is Thu Mar 28, 2024 1:12 pm