what are the reasons for choosing one pot bias adjustment per two tubes, versus single tube bias adjustment.
The simpler the better?
The simpler the better?
bias implementation on M-125 monoblocks
buchela- Posts: 14
Join date: 2011-03-09
View the profile
Bob Latino- Admin
- Posts: 1544
Join date: 2008-11-26
Location: Massachusetts
Yes - Using one bias pot for the two left tubes and one bias pot for the two right tubes keeps the bias circuit simpler. Most people will be using a matched quad of output tubes anyhow, so a further refinement of the bias circuit is not really necessary.
Bob
Bob
buchela- Posts: 14
Join date: 2011-03-09
BOB: The reason why I ask is: I ordered a quad set of EH kt88 and they came with stickers showing 39 and 40 written on them, I been told that is OK. that made my juices circulate fast, what about if I found myself with two different matched sets lets say 39 one pair and 41 the other one, would I be in trouble? will the M-125 take it without adversely affecting anything ?
Bob Latino- Admin
- Posts: 1544
Join date: 2008-11-26
Location: Massachusetts
Those tubes are so closely matched that they will work fine in there ..
Bob
Bob