Im a little confused and hope someone can clear up a hook-up question.I just recieved my power supply upgrade kit and Im not sure of one issue. When I refer to the directions Im missing or not understanding something somewhere. According to the pic of the Power Supply PCB it shows that B&L is connected to PC5-16 BUT in the written directions(#20) it seems to say that B&L should be connected to PC5-15. Does any one know which is correct?? Thanks in advance.
2 posters
Question on Pas3 VTA power supply board hook-up
hhibrownsbacker- Posts : 2
Join date : 2011-07-12
- Post n°1
Question on Pas3 VTA power supply board hook-up
by hhibrownsbacker Wed Jul 13, 2011 6:17 am
Roy Mottram- Admin
- Posts : 1837
Join date : 2008-11-30
- Post n°2
Re: Question on Pas3 VTA power supply board hook-up
by Roy Mottram Wed Jul 13, 2011 12:11 pm
B+L is the B+ for the line amp, it goes to PC5 eyelet 16
hhibrownsbacker- Posts : 2
Join date : 2011-07-12
- Post n°3
Re: Question on Pas3 VTA power supply board hook-up
by hhibrownsbacker Wed Jul 13, 2011 6:00 pm
Thank you!!
|
|
|