The Dynaco Tube Audio Forum

Would you like to react to this message? Create an account in a few clicks or log in to continue.
The Dynaco Tube Audio Forum

Dedicated to the restoration and preservation of all original Dynaco tube audio equipment - Customer support for Tubes4hifi VTA tube amp and preamp kits and all Dynakitparts.com products


5 posters

    The very rare Dynaco/Panor SCA-120 solid state integrated amp - photo

    Bob Latino
    Bob Latino
    Bob Latino
    Admin


    Posts : 3274
    Join date : 2008-11-26
    Location : Massachusetts
    • Post n°1

    The very rare Dynaco/Panor SCA-120 solid state integrated amp - photo Empty The very rare Dynaco/Panor SCA-120 solid state integrated amp - photo

    Post by Bob Latino Tue Mar 26, 2013 7:10 pm

    Back in the early '90's when Panor took over the Dynaco trade name they came out with a number of products. One of the rarest was the SCA-120. This was a 60 WPC solid state integrated amp with a single phono input, three high level inputs and a single tape loop. I know these are rare because in the last 10 years or so trolling on Ebay ... I have never seen one for sale ... These also look like many of the Adcom solid state gear of the '90's to the point where I am thinking that they could have been made by the same Taiwanese manufacturer that made the Adcom gear? Photos below ...

    Bob

    FRONT VIEW
    The very rare Dynaco/Panor SCA-120 solid state integrated amp - photo Dynaco-SCA-120-01

    REAR VIEW
    The very rare Dynaco/Panor SCA-120 solid state integrated amp - photo SCA120-2



    Last edited by Bob Latino on Sun Jul 31, 2022 11:54 am; edited 2 times in total
    • Back to top
    Roy Mottram
    Roy Mottram
    Roy Mottram
    Admin


    Posts : 1839
    Join date : 2008-11-30
    • Post n°2

    The very rare Dynaco/Panor SCA-120 solid state integrated amp - photo Empty Re: The very rare Dynaco/Panor SCA-120 solid state integrated amp - photo

    Post by Roy Mottram Wed Mar 27, 2013 12:59 pm

    yeah, looks like an Adcom with a Dynaco label on it !!
    • Back to top
    GP49
    avatar
    GP49


    Posts : 792
    Join date : 2009-04-30
    Location : East of the sun and west of the moon
    • Post n°3

    The very rare Dynaco/Panor SCA-120 solid state integrated amp - photo Empty Re: The very rare Dynaco/Panor SCA-120 solid state integrated amp - photo

    Post by GP49 Wed Mar 27, 2013 2:21 pm

    Quite frankly, I never thought of the Panor "Dynaco" gear as anything special, especially the transistor equipment. One could make a case for the tubed PAS-4 but I saw a disproportionate number of them come across my bench with various problems, so I wonder about Panor "engineering" skills, too.


    Last edited by GP49 on Wed Mar 27, 2013 6:56 pm; edited 1 time in total
    • Back to top
    tonebells
    tonebells
    tonebells


    Posts : 9
    Join date : 2011-08-17
    Location : United States
    • Post n°4

    The very rare Dynaco/Panor SCA-120 solid state integrated amp - photo Empty Re: The very rare Dynaco/Panor SCA-120 solid state integrated amp - photo

    Post by tonebells Wed Mar 27, 2013 6:50 pm

    Very NAD/Proton looking.
    • Back to top
    StereoGaryo
    StereoGaryo
    StereoGaryo


    Posts : 17
    Join date : 2010-11-06
    Location : SoCal
    • Post n°5

    The very rare Dynaco/Panor SCA-120 solid state integrated amp - photo Empty Re: The very rare Dynaco/Panor SCA-120 solid state integrated amp - photo

    Post by StereoGaryo Thu Mar 28, 2013 9:20 pm

    GP49 wrote:Quite frankly, I never thought of the Panor "Dynaco" gear as anything special, especially the transistor equipment. One could make a case for the tubed PAS-4 but I saw a disproportionate number of them come across my bench with various problems, so I wonder about Panor "engineering" skills, too.

    Just curious as to what kind of problems you've seen. Mine has been flawless since I bought it in the mid 1990's.
    I also recall hearing that John Nunes, who at one time was part of the MFA team, designed the PAS-4.
    • Back to top
    GP49
    avatar
    GP49


    Posts : 792
    Join date : 2009-04-30
    Location : East of the sun and west of the moon
    • Post n°6

    The very rare Dynaco/Panor SCA-120 solid state integrated amp - photo Empty Re: The very rare Dynaco/Panor SCA-120 solid state integrated amp - photo

    Post by GP49 Thu Mar 28, 2013 9:49 pm

    StereoGaryo wrote:Just curious as to what kind of problems you've seen. Mine has been flawless since I bought it in the mid 1990's.
    I also recall hearing that John Nunes, who at one time was part of the MFA team, designed the PAS-4.

    Largely issues in the MOSFET power supply regulators. Some had audio circuitry failures which I believe were CAUSED by power supply regulator problems.

    By now the PAS-4 is twenty years old; if yours has been flawless, I'd expect it will stay that way.
    • Back to top
    Sponsored content

    Sponsored content


    • Post n°7

    The very rare Dynaco/Panor SCA-120 solid state integrated amp - photo Empty Re: The very rare Dynaco/Panor SCA-120 solid state integrated amp - photo

    Post by Sponsored content

    • Back to top
      Current date/time is Mon Nov 18, 2024 1:23 pm