First time poster, Just got my first Dynaco Stereo 70 and am hoping to find an original board Cover. I have two small children and want to do everything to keep little fingers safe. If I can't find an original does anyone make one that's good looking?
+2
mijohn
Jwalke39
6 posters
Board Cover
mijohn- Posts : 119
Join date : 2013-06-19
You can buy them from this link below, scroll down to acrylic driver board covers:
http://www.tubes4hifi.com/bob.htm
http://www.tubes4hifi.com/bob.htm
Bob Latino- Admin
- Posts : 3276
Join date : 2008-11-26
Location : Massachusetts
mijohn wrote:You can buy them from this link below, scroll down to acrylic driver board covers:
http://www.tubes4hifi.com/bob.htm
The driver board covers seen on that web page are only for VTA driver boards from 2012 to the present day. This board cover will not fit a stock Dynaco ST-70 driver board with the two 7199 driver tubes.
Bob
Jwalke39- Posts : 4
Join date : 2020-05-02
Appreciate that info Bob, feel honored to have you commit on this, I am trying to keep it as original as possible since it was factory wired. I look forward to trying the Gold Lion KT-66 as I have read you like them.
peterh
peterh- Posts : 1869
Join date : 2012-12-25
Location : gothenburg, sweden
kiwidad- Posts : 6
Join date : 2020-06-01
Jwalke39 wrote:First time poster, Just got my first Dynaco Stereo 70 and am hoping to find an original board Cover. I have two small children and want to do everything to keep little fingers safe. If I can't find an original does anyone make one that's good looking?
Do you not have the overall cover? Other than the burn ricsk if the youngster breaks a tube there is a lot of volts under that glass! I have a spare one of those somewhere I think also.
I just picked up a factory ST70 which has that cover your referring to . Debating whether I want to replace the driver board or not.. If I do I could be persuaded to part with the cover.
DavidR- Posts : 158
Join date : 2017-08-10
Location : MetroWest, MA
Jwalke39- Posts : 4
Join date : 2020-05-02
I have that, I'm looking for the board cover
Jwalke39- Posts : 4
Join date : 2020-05-02
Kiwidad I would be interested