The Dynaco Tube Audio Forum

Would you like to react to this message? Create an account in a few clicks or log in to continue.
The Dynaco Tube Audio Forum

Dedicated to the restoration and preservation of all original Dynaco tube audio equipment - Customer support for Tubes4hifi VTA tube amp and preamp kits and all Dynakitparts.com products


2 posters

    My first Dynaco 70 restoration is complete.

    avatar
    extremegv1


    Posts : 9
    Join date : 2010-01-23
    Age : 58
    Location : Gilroy CA.

    My first Dynaco 70 restoration is complete. Empty My first Dynaco 70 restoration is complete.

    Post by extremegv1 Tue Jul 13, 2010 6:49 pm

    Thanks Bob for all the help. amp sounds good and was fun to build! The driver board has 3 vintage Mullard 12at7 and the power
    tubes are reissue Tung Sol KT-66. i will update on performance after a good burnin.

    Thanks
    Gary J. Vogel My first Dynaco 70 restoration is complete. I:\DCIM\100CANON\IMG_0005[url=I:\DCIM\100CANON\IMG_0005.JPG]I:\DCIM\100CANON\IMG_0005.JPG[/url]
    ViperZ
    ViperZ


    Posts : 100
    Join date : 2010-03-26

    My first Dynaco 70 restoration is complete. Empty Re: My first Dynaco 70 restoration is complete.

    Post by ViperZ Wed Aug 11, 2010 12:49 pm

    extremegv1 wrote:Thanks Bob for all the help. amp sounds good and was fun to build! The driver board has 3 vintage Mullard 12at7 and the power
    tubes are reissue Tung Sol KT-66. i will update on performance after a good burnin.

    Thanks
    Gary J. Vogel My first Dynaco 70 restoration is complete. I:\DCIM\100CANON\IMG_0005[url=I:\DCIM\100CANON\IMG_0005.JPG]I:\DCIM\100CANON\IMG_0005.JPG[/url]

    You need to post pictures on the internet, on the sites like Flickr or Photobucket, or similar, not links to your hard drive.

      Current date/time is Tue Mar 19, 2024 3:01 am