My VTA ST 120 Faceplate
My 18" x 3/8" x 2 1/2" (L x W x H) aluminum flat bar stock arrived today for my VTA ST 120 faceplate and it looks perfect except of course the length needs to be trimmed to size.
As you can see in the photos I'm going to have 1 inch overlap on the right and the left of the chassis so I have enough room to install two 2 inch rack handles on both ends of the faceplate for carrying the amplifier when I need to move it to a different location.
There is 1/4 inch above the bottom of the chassis and 1/4 inch above the top of the chassis which is perfect.
I'm also thinking about having the faceplate, the quad cap, and the original Dynaco ST 70 mesh metal cover I'm going to install over the VTA driver board anodized a rose gold color.
Have a good day and clear skies and stay safe everyone.
Tom
My 18" x 3/8" x 2 1/2" (L x W x H) aluminum flat bar stock arrived today for my VTA ST 120 faceplate and it looks perfect except of course the length needs to be trimmed to size.
As you can see in the photos I'm going to have 1 inch overlap on the right and the left of the chassis so I have enough room to install two 2 inch rack handles on both ends of the faceplate for carrying the amplifier when I need to move it to a different location.
There is 1/4 inch above the bottom of the chassis and 1/4 inch above the top of the chassis which is perfect.
I'm also thinking about having the faceplate, the quad cap, and the original Dynaco ST 70 mesh metal cover I'm going to install over the VTA driver board anodized a rose gold color.
Have a good day and clear skies and stay safe everyone.
Tom