The Dynaco Tube Audio Forum

Dedicated to the restoration and preservation of all original Dynaco tube audio equipment - Customer support for Dynaco VTA tube amp kits, all Tubes4hifi.com products and all Dynakitparts.com products


    Phono Pre Amp Before PAS2

    Share

    Rowbo1

    Posts : 6
    Join date : 2011-01-27

    Phono Pre Amp Before PAS2

    Post by Rowbo1 on Fri Jan 28, 2011 9:39 pm

    I may have drove someone crazy over at the bottlehead fourum.
    Should I use my NAD PP2 phono pre amp between the TT and the PAS2.
    Dave

    Bob Latino
    Admin

    Posts : 2378
    Join date : 2008-11-26
    Location : Massachusetts

    Re: Phono Pre Amp Before PAS2

    Post by Bob Latino on Fri Jan 28, 2011 10:32 pm

    Hi,

    The PAS-2 has a built in phono preamp. Just plug the interconnects from the TT directly into the PAS-2's phone input.

    Bob

    Rowbo1

    Posts : 6
    Join date : 2011-01-27

    Re: Phono Pre Amp Before PAS2

    Post by Rowbo1 on Sat Jan 29, 2011 12:38 am

    Thank you.

    ruffian

    Posts : 43
    Join date : 2010-02-26

    Re: Phono Pre Amp Before PAS2

    Post by ruffian on Sat Jan 29, 2011 7:20 pm

    There is no reason why you can't use the PP2 either. Just plug it into one of the line in (not the phono in). Then you can have fun comparing the PAS phono section to the PP2. Or run two tt... If you have a low output MC cart I think you will need the PP2.

    Sponsored content

    Re: Phono Pre Amp Before PAS2

    Post by Sponsored content Today at 1:11 pm


      Current date/time is Sat Oct 01, 2016 1:11 pm